YinkeValve · Engineered Flow Controlsale@yinkevalves.com
Home / Products / API 602 LF2 Gate Valve Class 800 NPT
Gate Valve

API 602 LF2 Gate Valve Class 800 NPT

API 602 LF2 Gate Valve Class 800 NPT combines Forged Gate Valve, LF2, Class 800, NPT and Metal Seat in one defined purchasing configuration. Use it when those core parameters are already fixed by the valve list or piping specification.

API 602Design basis
Class 800Pressure class
LF2Pressure-boundary material
Technical Configuration

API 602 LF2 Gate Valve Class 800 NPT

DesignForged Gate Valve
StandardAPI 602
Pressure ClassClass 800
Body MaterialLF2
End ConnectionNPT
Seat / SealMetal Seat
Service / Application
OperationHandwheel / Gear
Request Technical QuoteTechnical Documents
Buyer Decision Summary

Why This Exact Configuration Exists

The commercial scope for API 602 LF2 Gate Valve Class 800 NPT is controlled by the interaction of body construction, material, pressure class, piping interface, sealing and operation—not by the valve name alone.

Selection reason

Choose API 602 LF2 Gate Valve Class 800 NPT when the RFQ specifically calls for Forged Gate Valve, LF2, Class 800 and NPT. Isolation behavior is governed by closure geometry, stem/bonnet construction and seating surfaces.

What changes technically

For API 602 LF2 Gate Valve Class 800 NPT, the combined technical effect is low-temperature carbon-steel forging where impact-tested material condition is important; compact forged-valve pressure class typically associated with socket-weld or threaded piping systems; and thread form, engagement, sealant practice and pressure-class compatibility should match the project piping specification. Metal seating shifts the design toward hardfacing/coating, lapping, higher torque and wear control rather than polymer-seat compliance.

What to confirm before quote

Before pricing API 602 LF2 Gate Valve Class 800 NPT, confirm nominal size and bore, design pressure/temperature, trim and stem/shaft material, the Metal Seat sealing requirement, Handwheel / Gear operating basis, leakage/test acceptance and the final drawing/document package.

Compared with a nearby configuration

Compared with API 602 LF2 Gate Valve Class 800 Socket Weld, this configuration changes piping interface (NPT instead of Socket Weld). That difference is what a buyer should verify before treating the two pages as commercially interchangeable.

Design Basis

In API 602 LF2 Gate Valve Class 800 NPT, the Forged Gate Valve construction determines the closure support, body arrangement and maintenance approach. Confirm bore or flow path, body joint, stem/shaft retention, seat support, anti-blowout features where applicable and access requirements against the approved GA.

Pressure-Boundary Material

For API 602 LF2 Gate Valve Class 800 NPT, the pressure boundary is LF2. Low-temperature carbon-steel forging where impact-tested material condition is important. Because this valve is Class 800 with NPT, verify the material condition, trim compatibility, bolting and any PMI/NDE or corrosion-control requirement as one package.

Pressure Class and Piping Interface

For API 602 LF2 Gate Valve Class 800 NPT, the specified rating is Class 800 and the piping interface is NPT. Compact forged-valve pressure class typically associated with socket-weld or threaded piping systems. Thread form, engagement, sealant practice and pressure-class compatibility should match the project piping specification. Final dimensions and pressure-temperature suitability must therefore be checked against the selected material and design temperature, not inferred from class alone.

Seat and Seal Arrangement

For API 602 LF2 Gate Valve Class 800 NPT, the listed sealing basis is Metal Seat. Metal seating shifts the design toward hardfacing/coating, lapping, higher torque and wear control rather than polymer-seat compliance. Confirm leakage acceptance, pressure/temperature limits and cycling together with the Class 800 loading and the selected Handwheel / Gear operating method.

Operation and Actuation

For API 602 LF2 Gate Valve Class 800 NPT, operation is Handwheel / Gear. Manual handwheel/gear selection should keep rim pull and operating effort practical at the maximum specified differential pressure. The final operator or actuator basis should use the actual size, maximum differential pressure, Metal Seat friction/seating behavior and required operating or emergency time.

Service Conditions

No service qualifier is fixed by the product name, so API 602 LF2 Gate Valve Class 800 NPT should be released only after the actual fluid, temperature range, pressure cases, cycling and special service requirements are known.

Inspection and Testing

For API 602 LF2 Gate Valve Class 800 NPT, tie MTC/heat traceability, dimensional inspection, PMI/NDE where specified, shell/seat testing, coating checks, witness points and final records to the approved API 602 datasheet and ITP.

Documents Before Release

The manufacturing release for API 602 LF2 Gate Valve Class 800 NPT should reference the approved GA, material/trim schedule, seat/seal definition, operator or actuator data, test scope and required final documentation.

Relevant Product Ranges

LF2 ValvesProduct range→NPT Gate ValvesProduct range→LF2 Gate ValvesProduct range→Class 800 Gate ValvesProduct range→
API 602 LF2 Gate Valve Class 800 Socket WeldAPI 602 · Class 800→API 602 LF2 Gate Valve Class 1500 NPTAPI 602 · Class 1500→API 602 LF2 Gate Valve Class 1500 Socket WeldAPI 602 · Class 1500→API 602 LF2 Gate Valve Class 2500 Butt WeldAPI 602 · Class 2500→API 602 LF2 Gate Valve Class 2500 Socket WeldAPI 602 · Class 2500→API 602 A105N Gate Valve Class 800 NPTAPI 602 · Class 800→API 602 A105N Gate Valve Class 800 Socket WeldAPI 602 · Class 800→API 602 F22 Gate Valve Class 800 NPTAPI 602 · Class 800→

Ready to Review API 602 LF2 Gate Valve Class 800 NPT?

Send the project specification for API 602 LF2 Gate Valve Class 800 NPT; the quotation can then confirm size-dependent dimensions, trim, sealing, operation, inspection and final documents without changing the defined LF2 / Class 800 basis.

Request Technical Quote