Design Basis
In API 608 WCB 2 Piece Flanged Floating Ball Valve Class 600, the 2 Piece Floating Ball Valve construction determines the closure support, body arrangement and maintenance approach. Confirm bore or flow path, body joint, stem/shaft retention, seat support, anti-blowout features where applicable and access requirements against the approved GA.
Pressure-Boundary Material
For API 608 WCB 2 Piece Flanged Floating Ball Valve Class 600, the pressure boundary is WCB. Cast carbon steel for general hydrocarbon and process pressure boundaries. Because this valve is Class 600 with Flanged, verify the material condition, trim compatibility, bolting and any PMI/NDE or corrosion-control requirement as one package.
Pressure Class and Piping Interface
For API 608 WCB 2 Piece Flanged Floating Ball Valve Class 600, the specified rating is Class 600 and the piping interface is Flanged. Higher-pressure service where pressure-boundary dimensions, bolting and operating loads become more significant. The flange standard, facing, drilling, gasket and face-to-face dimensions must align with the mating piping. Final dimensions and pressure-temperature suitability must therefore be checked against the selected material and design temperature, not inferred from class alone.
Seat and Seal Arrangement
For API 608 WCB 2 Piece Flanged Floating Ball Valve Class 600, the listed sealing basis is RPTFE / PTFE. Rptfe uses reinforcement to improve mechanical stability and wear behavior; filler system, temperature and chemistry must match the service. Confirm leakage acceptance, pressure/temperature limits and cycling together with the Class 600 loading and the selected Lever / Gear operating method.
Operation and Actuation
For API 608 WCB 2 Piece Flanged Floating Ball Valve Class 600, operation is Lever / Gear. Lever operation suits lower operating torque ranges; handle length, locking and position indication should be coordinated with access needs. The final operator or actuator basis should use the actual size, maximum differential pressure, RPTFE / PTFE friction/seating behavior and required operating or emergency time.
Service Conditions
No service qualifier is fixed by the product name, so API 608 WCB 2 Piece Flanged Floating Ball Valve Class 600 should be released only after the actual fluid, temperature range, pressure cases, cycling and special service requirements are known.
Inspection and Testing
For API 608 WCB 2 Piece Flanged Floating Ball Valve Class 600, tie MTC/heat traceability, dimensional inspection, PMI/NDE where specified, shell/seat testing, coating checks, witness points and final records to the approved API 608 datasheet and ITP.
Documents Before Release
The manufacturing release for API 608 WCB 2 Piece Flanged Floating Ball Valve Class 600 should reference the approved GA, material/trim schedule, seat/seal definition, operator or actuator data, test scope and required final documentation.