Design Basis
In API 6D C12A Metal Seated Trunnion Ball Valve Class 2500, the Metal Seated Trunnion Ball Valve construction determines the closure support, body arrangement and maintenance approach. Confirm bore or flow path, body joint, stem/shaft retention, seat support, anti-blowout features where applicable and access requirements against the approved GA.
Pressure-Boundary Material
For API 6D C12A Metal Seated Trunnion Ball Valve Class 2500, the pressure boundary is C12A. Creep-strength-enhanced alloy-steel casting used in high-temperature power service. Because this valve is Class 2500 with Flanged / BW, verify the material condition, trim compatibility, bolting and any PMI/NDE or corrosion-control requirement as one package.
Pressure Class and Piping Interface
For API 6D C12A Metal Seated Trunnion Ball Valve Class 2500, the specified rating is Class 2500 and the piping interface is Flanged / BW. Very-high-pressure service requiring rigorous review of pressure boundary, ends, bolting, testing and operation. The project can select flanged or butt-weld ends, so face-to-face, flange facing or weld-end preparation must match the piping class. Final dimensions and pressure-temperature suitability must therefore be checked against the selected material and design temperature, not inferred from class alone.
Seat and Seal Arrangement
For API 6D C12A Metal Seated Trunnion Ball Valve Class 2500, the listed sealing basis is Metal-to-Metal. Metal seating shifts the design toward hardfacing/coating, lapping, higher torque and wear control rather than polymer-seat compliance. Confirm leakage acceptance, pressure/temperature limits and cycling together with the Class 2500 loading and the selected Gear / Actuator operating method.
Operation and Actuation
For API 6D C12A Metal Seated Trunnion Ball Valve Class 2500, operation is Gear / Actuator. Gear or powered actuation should be selected from the valve torque curve, maximum differential pressure, operating frequency and required closing time. The final operator or actuator basis should use the actual size, maximum differential pressure, Metal-to-Metal friction/seating behavior and required operating or emergency time.
Service Conditions
No service qualifier is fixed by the product name, so API 6D C12A Metal Seated Trunnion Ball Valve Class 2500 should be released only after the actual fluid, temperature range, pressure cases, cycling and special service requirements are known.
Inspection and Testing
For API 6D C12A Metal Seated Trunnion Ball Valve Class 2500, tie MTC/heat traceability, dimensional inspection, PMI/NDE where specified, shell/seat testing, coating checks, witness points and final records to the approved API 6D datasheet and ITP.
Documents Before Release
The manufacturing release for API 6D C12A Metal Seated Trunnion Ball Valve Class 2500 should reference the approved GA, material/trim schedule, seat/seal definition, operator or actuator data, test scope and required final documentation.