YinkeValve · Engineered Flow Controlsale@yinkevalves.com
Home / Products / F316 Reduced Port Floating Ball Valve Class 300
Ball Valve

F316 Reduced Port Floating Ball Valve Class 300

F316 Reduced Port Floating Ball Valve Class 300 combines Floating Ball Valve, F316, Class 300, SW / NPT and PTFE / RPTFE in one defined purchasing configuration. Use it when those core parameters are already fixed by the valve list or piping specification.

API 608Design basis
Class 300Pressure class
F316Pressure-boundary material
Technical Configuration

F316 Reduced Port Floating Ball Valve Class 300

DesignFloating Ball Valve
StandardAPI 608
Pressure ClassClass 300
Body MaterialF316
End ConnectionSW / NPT
Seat / SealPTFE / RPTFE
Service / Application
OperationLever
Request Technical QuoteTechnical Documents
Buyer Decision Summary

Why This Exact Configuration Exists

The commercial scope for F316 Reduced Port Floating Ball Valve Class 300 is controlled by the interaction of body construction, material, pressure class, piping interface, sealing and operation—not by the valve name alone.

Selection reason

Choose F316 Reduced Port Floating Ball Valve Class 300 when the RFQ specifically calls for Floating Ball Valve, F316, Class 300 and SW / NPT. Floating-ball construction uses line pressure to load the ball toward the downstream seat and suits compact quarter-turn isolation ranges. The configuration also fixes reduced port, which changes the purchasing basis compared with a generic ball valve.

What changes technically

For F316 Reduced Port Floating Ball Valve Class 300, the combined technical effect is forged austenitic stainless steel for corrosion-resistant pressure-boundary service; medium pressure service with heavier flanges, bolting and wall sections than Class 150; and socket-weld and threaded ends require the piping class to define pipe schedule, thread/weld details and installation practice. Rptfe uses reinforcement to improve mechanical stability and wear behavior; filler system, temperature and chemistry must match the service.

What to confirm before quote

Before pricing F316 Reduced Port Floating Ball Valve Class 300, confirm nominal size and bore, design pressure/temperature, trim and stem/shaft material, the PTFE / RPTFE sealing requirement, Lever operating basis, leakage/test acceptance and the final drawing/document package.

Compared with a nearby configuration

Compared with F316 Full Port Floating Ball Valve Class 300, this configuration changes feature set (reduced port instead of full port). That difference is what a buyer should verify before treating the two pages as commercially interchangeable.

Design Basis

In F316 Reduced Port Floating Ball Valve Class 300, the Floating Ball Valve construction determines the closure support, body arrangement and maintenance approach. Confirm bore or flow path, body joint, stem/shaft retention, seat support, anti-blowout features where applicable and access requirements against the approved GA.

Pressure-Boundary Material

For F316 Reduced Port Floating Ball Valve Class 300, the pressure boundary is F316. Forged austenitic stainless steel for corrosion-resistant pressure-boundary service. Because this valve is Class 300 with SW / NPT, verify the material condition, trim compatibility, bolting and any PMI/NDE or corrosion-control requirement as one package.

Pressure Class and Piping Interface

For F316 Reduced Port Floating Ball Valve Class 300, the specified rating is Class 300 and the piping interface is SW / NPT. Medium pressure service with heavier flanges, bolting and wall sections than class 150. Socket-weld and threaded ends require the piping class to define pipe schedule, thread/weld details and installation practice. Final dimensions and pressure-temperature suitability must therefore be checked against the selected material and design temperature, not inferred from class alone.

Seat and Seal Arrangement

For F316 Reduced Port Floating Ball Valve Class 300, the listed sealing basis is PTFE / RPTFE. Rptfe uses reinforcement to improve mechanical stability and wear behavior; filler system, temperature and chemistry must match the service. Confirm leakage acceptance, pressure/temperature limits and cycling together with the Class 300 loading and the selected Lever operating method.

Operation and Actuation

For F316 Reduced Port Floating Ball Valve Class 300, operation is Lever. Lever operation suits lower operating torque ranges; handle length, locking and position indication should be coordinated with access needs. The final operator or actuator basis should use the actual size, maximum differential pressure, PTFE / RPTFE friction/seating behavior and required operating or emergency time.

Service Conditions

No service qualifier is fixed by the product name, so F316 Reduced Port Floating Ball Valve Class 300 should be released only after the actual fluid, temperature range, pressure cases, cycling and special service requirements are known.

Inspection and Testing

For F316 Reduced Port Floating Ball Valve Class 300, tie MTC/heat traceability, dimensional inspection, PMI/NDE where specified, shell/seat testing, coating checks, witness points and final records to the approved API 608 datasheet and ITP.

Documents Before Release

The manufacturing release for F316 Reduced Port Floating Ball Valve Class 300 should reference the approved GA, material/trim schedule, seat/seal definition, operator or actuator data, test scope and required final documentation.

Relevant Product Ranges

Reduced Port Ball ValvesProduct range→F316 Ball ValvesProduct range→
F316 Full Port Floating Ball Valve Class 300API 608 · Class 300→F316 Full Port Floating Ball Valve Class 150API 608 · Class 150→F316 Reduced Port Floating Ball Valve Class 150API 608 · Class 150→A105N Full Port Floating Ball Valve Class 300API 608 · Class 300→A105N Reduced Port Floating Ball Valve Class 300API 608 · Class 300→CF8M Full Port Floating Ball Valve Class 300API 608 · Class 300→CF8M Reduced Port Floating Ball Valve Class 300API 608 · Class 300→WCB Full Port Floating Ball Valve Class 300API 608 · Class 300→

Ready to Review F316 Reduced Port Floating Ball Valve Class 300?

Send the project specification for F316 Reduced Port Floating Ball Valve Class 300; the quotation can then confirm size-dependent dimensions, trim, sealing, operation, inspection and final documents without changing the defined F316 / Class 300 basis.

Request Technical Quote